Seat Bench Cover and Upholstery

Rear Seat Cover and Upholstery

Seat Bench Cover and Upholstery

• The work steps are described for the right bench seat. The work steps for the left bench seat are identical.

Removal

- Remove bench seat. Refer to => [ Seat Bench ] Rear Seats

- Using a screw driver, pry clamping profiles - 1 -, - 2 - and - 3 - of cover - 5 - all around out of mounts in seat pan - 4 -.





- Fold back cover - 1 -.

- Cut through the five upholstery clips - arrows - in rear area using a diagonal cutter.





- Cut through all upholstery clips - arrows - and loosen cover - 1 - from upholstery - 2 - using a diagonal cutter.

- Loosen upholstery from seat pan.





Installation

- To install, perform the steps used for removal in reverse order.

• Use (V.A.G 1634) when affixing cover to upholstery.