Resetting Using Vehicle Diagnosis Tester

03 - Service Procedures


Service Interval Display, Resetting

Service interval display must be reset at

• Vehicle delivery inspection

• Each oil change and interval service

(adapted)!

- Connect the vehicle tester.

- Switch ignition on.

- Press button/field: GUIDED FUNCTIONS.

If the displays indicated in the procedure are not shown on the display: Operating Instructions for Vehicle Diagnosis Tester

- Press the > button to confirm.

- Select in succession:

• Brand

• Model

• Model year

• Engine Code

- Confirm vehicle identification.

- Select in succession:

• "Instrument cluster" - ARROW -.





• "Rest service interval display".

- Perform Adaptation according to instructions from "GUIDED FUNCTIONS".





End Adaptation

Indicated on display:

- Press the Go to button - arrow - on display.

Indicated on display:





- Press Exit button - arrow - on display.

- Press Exit button in exit menu.

- Turn off ignition and disconnect diagnostic connection.

- Switch ignition on.

After switching on the ignition, service event is no longer indicated in the odometer display in the instrument panel insert.

• The service interval display can also be reset manually. When resetting the service interval display manually, make sure the vehicle is coded for fixed intervals.