Sunroof Glass

Sunroof Glass

Removing

- Move the glass panel to the vent position.

- Slide sunshade rearward to the open position.

- Remove the glass panel screws.

- Lift off glass panel and remove from vehicle.

Installing

- Position glass panel on to mechanism lift arms.

- Start the attaching screws.

- Connect a 12 volt power supply and move the sunroof to the vent position then to the closed position.

- Adjust sunroof glass to fit flush with roof line. Refer to => [ Sunroof Glass Adjustments ] Adjustments.

- Tighten the screws.

- Verify sunroof operation and alignment.