EVAP Purge Solenoid

EVAP Purge Solenoid

Removing

- Remove the air cleaner housing cover in order to gain access to the evaporative emission purge solenoid.

- Disconnect the engine wiring harness electrical connector (1) from the EVAP purge solenoid (5).






- Remove the EVAP purge hose (2) from EVAP purge solenoid (5).

- Disconnect the fuel tank vapor line quick connect fitting (4) from the EVAP purge solenoid (5).

- Remove the EVAP purge solenoid nut (3).

- Remove the EVAP purge solenoid (5).

Installing






- Install the EVAP purge solenoid (5) and nut (3). Tighten the nut to 10 Nm (89 in lbs).

- Install the fuel tank vapor line quick connect fitting (4) to the EVAP purge solenoid (5).

- Install the EVAP purge hose (2) to the EVAP purge solenoid (5). Make sure the plastic clip for the purge hose (2) is connected.

- Connect the engine wiring harness electrical connector (1) to the EVAP purge solenoid (5).

- Install the air cleaner housing cover.