Engine Controls - MIL ON/DTC P013A Set

01 10 02

February 10, 2010

2022613





Vehicle Information





Condition

Update Programming, MIL ON, P013A O2 Sensor Slow Response, Rich to Lean Condition

Technical Background

Update programming of the Powertrain Control Module (PCM) with improved software to correct the DTC P013A.

Tip:
^ StarMOBILE UPDATE PROGRAMMING FILES FOR THIS BULLETIN MUST BE RETRIEVED FROM THE INTERNET.

^ StarMOBILE SOFTWARE LEVEL MUST BE AT RELEASE 10.01 OR HIGHER FOR THIS BULLETIN.

^ StarMOBILE STANDALONE MODE OR StarMOBILE DESKTOP CLIENT MAY ALSO BE USED TO PERFORM THIS PROCEDURE.

Production Solution

Improved PCM software has been introduced in production as of November 26, 2009.

Service

Update programming of the Powertrain Control Module (PCM) with new software.

DIAGNOSIS

Using a StarMOBILE with ElsaWeb and the appropriate Diagnostic Procedures, verify all engine systems are functioning as designed. If DTC's are present, record them on the repair order and repair as necessary before proceeding with this bulletin. If the customer describes the Symptom/Condition, or it can be reproduced, perform the Repair Procedure.

REPAIR PROCEDURE

Note:
If this flash process is interrupted / aborted, the flash should be restarted.

1. Reprogram the Powertrain Control Module using the StarMOBILE with the latest software.

2. After PCM reprogramming, the following must be performed:

^ Clear any DTC's that may have been set in other modules due to reprogramming.

^ Clear the Variable Line Pressure (VLP) Counters, found in the Misc. Function menu for the PCM / ECU.

^ Perform the Quick Learn function, found in the Misc. Function menu for the PCM / ECU.








Warranty





Required Parts and Tools

Additional Information

All part and service references provided in this Technical Bulletin are subject to change and/or removal.
Always check with your Parts Dept. and Repair Manuals for the latest information.