B142A

B142A - Radio Unit High Temperature

For a complete wiring diagram, refer to.

• When Monitored: Continuously with the ignition and radio on.

• Set Condition: The code will set if the temperature inside the radio is more than +65°C (+145°F).






Test Step 1 - Verify that DTC B142A - Radio Unit High Temperature is Active.

• With the scan tool, erase the audio DTCs.

• Start the engine and allow the engine to reach normal operating temperature.

• If the vehicle has been in the hot sunlight or extreme cold, move the vehicle indoors and open the doors to allow the inside temperature to stabilize.

• The radio should operate between -23°C and 65°C (-10°F and +145°F).

• With the scan tool, read the DTC's.

Does the scan tool display B142A - Radio Unit High Temperature?

Yes

• Replace the radio.

• Perform the Body Verification Test. Refer to => Non-DTC Based Diagnostics. Body Interior

No

• Test complete.

• Perform the Body Verification Test. Refer to => Non-DTC Based Diagnostics. Body Interior