Video Entertainment System (VES3)

B210A-System Voltage Low

For a complete wiring diagram, refer to.

• When Monitored: With the ignition on.

• Set Condition: This is a CAN message that the battery voltage was below 10 volts for over 20 seconds.






Test Step 1 - CHECK ENGINE DTCs

• With the scan tool, read Engine DTCs.

Are there any ENGINE Charging or Battery DTCs present?

Yes

• Perform the appropriate diagnostic procedure.

No

• This code is for information only. At some time there was a low battery system voltage. Check the battery and charging system in accordance with the Service Information.