Wireless Ignition Node

B210A - System Voltage Low

For a complete wiring diagram, refer to.

• When Monitored: At all times.

• Set Condition: This is a CAN message that the battery voltage was below 10.0 volts for over 15 seconds.






Test Step 1 - CHECK POWERTRAIN CONTROL MODULE DTCs

• With the scan tool, read Powertrain DTCs.

Are there any Powertrain Charging or Battery DTCs present?

Yes

• Perform the appropriate diagnostic procedure.

No

• This code is for information only. At some time there was a low battery system voltage. Check the battery and charging system in accordance with the Service Information.

• Perform the Body Verification Test. Refer to => Non-DTC Based Diagnostics. Body Interior