Blind Spot Module

B210C - Battery Voltage Input

For a complete wiring diagram, refer to.

• When Monitored: With the ignition ON. Vehicle speed greater than 6 mph (9.6 km/h).

• Set Condition: The blind spot module detects an internal failure.






Test Step 1 - Check For Active DTC

• Turn the ignition ON.

• With the scan tool, read blind spot module DTCs.

Does the scan tool display B210C - Battery Voltage Input?

Yes

• Replace the blind spot module. .

• Perform the Body Verification Test. Refer to => Non-DTC Based Diagnostics. Body Interior

No

• The condition that caused this code to set is not present at this time. Check for an intermittent condition by inspecting the related wiring harness for chafed, pierced, pinched, and partially broken wires. Also inspect the related connectors for broken, bent, pushed out, spread, corroded, or contaminated terminals.

• Perform the Body Verification Test. Refer to => Non-DTC Based Diagnostics. Body Interior