RKE FOB 3 Performance - RKE Transmitter

B210E - Battery Voltage High

For a complete wiring diagram, refer to.

• When Monitored: With the ignition switch on.

• Set Condition: The wireless ignition node has detected the fused B+ input voltage more than a calibrated value.






Test Step 1 - Determining if DTC is Current


Diagnose and repair all Powertrain DTCs before continuing.

• Turn the ignition ON.

• With the scan tool, record and erase the WIN DTCs.

• Perform 5 ignition cycles, leaving the ignition switch ON for a minimum of 90 seconds per cycle.

• Using the scan tool, read the WIN DTCs.

Does the DTC reset?

Yes

• Replace and program the wireless ignition node.

• Perform the WIN Verification Test. Refer to => Non-DTC Based Diagnostics. Wireless Ignition Node Verification Test

No

• Perform the WIN Verification Test. Refer to => Non-DTC Based Diagnostics. Wireless Ignition Node Verification Test