Wireless Ignition Node

B2206 - Current VIN Missing/Mismatch

For a complete wiring diagram, refer to.

• When Monitored: Anytime the ignition key is in the ON position.

• Set Condition: VIN stored in intrusion transceiver module does not match the VIN stored in the cluster.






Test Step 1 - Determining if Diagnostic Trouble Code is Current

• With a scan tool, read and record DTCs.

• With the scan tool, clear DTCs.

• Turn the ignition OFF and remove the key from the ignition.

• Lock and close all doors to allow the VTSS to go from pre-arm to armed status and wait one minute.

• Disarm the VTSS.

• Using the scan tool, read ITM DTC.

Does the DTC reset?

Yes

• Using the scan tool under miscellaneous functions initialize the intrusion transceiver module.

• Perform the Body Verification Test. Refer to => Non-DTC Based Diagnostics. Body Interior

No

• DTC is not active at this time. Test complete.

• Perform the Body Verification Test. Refer to => Non-DTC Based Diagnostics. Body Interior