Blind Spot Module
B223B - Vehicle Configuration Mismatch
For a complete wiring diagram, refer to.
• When Monitored: With the ignition ON. Vehicle speed greater than 6 mph (9.6 km/h).
• Set Condition: This DTC will set if the vehicle type is not identified or incorrectly identified.
Test Step 1 -
• Diagnose and repair any PCM VIN or Communication DTCs before continuing with this test.
• Turn the ignition ON.
• With the scan tool, select View DTCs.
Does the scan tool display B223B - Vehicle Configuration Mismatch?
Yes
• Check vehicle configuration in TIPM. Refer to => Non-DTC Based Diagnostics.
No
• Use the scan tool to check for DTCs in all other modules. If any communication DTCs are present, perform the appropriate diagnostic procedure. Perform any technical service bulletins that apply. If no problems are found, test is complete.