Operation CHARM: Car repair manuals for everyone.

Left Power Sliding Door Module






B226F - Left Power Sliding Door Module Internal

For a complete wiring diagram, refer to.

When Monitored: Whenever the battery is connected.

Set Condition: When the module senses an internal problem, this code will set.






Test Step 1 - DTC Present

With the scan tool, record and erase DTCs.

Cycle the ignition switch from On to Off.

Wait 30 seconds.

Turn the ignition ON.

With the scan tool, check for DTCs.

Does the scan tool display B226F - Left Power Sliding Door Module Internal?

No

Operate the left power sliding door with several power open and close cycles. With the scan tool, check for DTCs. If this code appears, replace the left power sliding door module.

Perform the Body Verification Test. Refer to=> Non-DTC Based Diagnostics. Body Interior

Yes

Replace the left power sliding door module.

Perform the Body Verification Test. Refer to=> Non-DTC Based Diagnostics. Body Interior