P1697

P1697 - EMR SRI Mileage Not Stored

For wiring diagrams, refer to.

• When Monitored: Ignition on and battery voltage greater than 10 volts.

• Set Condition: The PCM odometer mileage has not been programmed into the PCM.






• Always perform the pre-diagnostic troubleshooting procedure before proceeding. Refer to => Non-DTC Based Diagnostics. Pre-Diagnostic Troubleshooting Procedure

Test Step 1 - PCM Odometer Mileage Not Programmed

• Turn the ignition ON.

• With the scan tool, attempt to perform the program PCM odometer function.

• With the scan tool, clear DTCs.

• Start the engine.

• Allow the engine to reach normal operating temperature.

• With a scan tool, select view DTCs.

Is the status Active for this DTC?

Yes

• Replace and program the PCM.

• Perform the PCM Verification Test. Refer to => Non-DTC
Based Diagnostics. PCM Verification Test

No

• The SRI mileage has been successfully programmed into the PCM. Test is complete.

• Perform the PCM Verification Test. Refer to => Non-DTC
Based Diagnostics. PCM Verification Test