Manual Three Zone Temperature Control
U0168-Lost Communication With Vehicle Security Control Module (WIN)
For a complete wiring diagram, refer to.
• When Monitored: With the ignition on. Battery voltage between 10 and 16 volts. Ignition Off Draw (IOD) fuse installed. Totally Integrated Power Module (TIPM) is configured correctly.
• Set Condition: Bus messages not received from the Wireless Ignition Node (WIN) for approximately two to five seconds.
Test Step 1 - VERIFY DTC IS ACTIVE
• Make sure the IOD fuse is installed and the battery is fully charged before proceeding.
• Turn the ignition on.
• With the scan tool, read active DTCs.
Is this DTC active?
Yes
• Refer to => Electrical System DTC Based Diagnostics and perform the U0168-Lost Communication with Vehicle Security Control Module (WIN) diagnostic procedure.
No
• Refer to => Non-DTC Based Diagnostics and perform the Stored Lost Communication DTCs diagnostic procedure. Stored Lost Communication DTCs