Blind Spot Module

U0423-00 - Implausible Data Received From Cluster/CCN

For a complete wiring diagram, refer to.

• When Monitored: With the ignition on. Vehicle speed greater than 6 mph (9.6 km/h).

• Set Condition: Implausible data received from the Cluster.






Test Step 1 - CHECK FOR AN ACTIVE DIAGNOSTIC TROUBLE CODE (DTC)

• Diagnose any Cluster DTCs before proceeding with the test.

• Turn the ignition on.

• With the scan tool, read BSM DTCs.

Does the scan tool display this DTC as active?

Yes

• Replace the Cluster in accordance with the Service Information.

• Perform the Body Verification Test. Refer to=> Non-DTC Based Diagnostics. Body Interior

No

• The condition that caused this code to set is not present at this time. Check for an intermittent condition by inspecting the related wiring harness for chafed, pierced, pinched, and partially broken wires. Also inspect the related connectors for broken, bent, pushed out, spread, corroded, or contaminated terminals.

• Perform the Body Verification Test. Refer to=> Non-DTC Based Diagnostics. Body Interior