Lumbar Support Handle

Lumbar Support Handle

• Left seat shown. Right seat similar.

Removing






- Remove the screw (2) securing the lumbar support handle (1) to the splined shaft which protrudes through the outboard side of the seat back cushion cover (3).

- Remove the lumbar support handle from the shaft by pulling it straight outward.

Installing






- Align the large spline on the lumbar support handle (1) with the large spline on the shaft which protrudes through the seat back cushion cover (3) and install the handle onto the shaft.

- Install the screw (2) securing the lumbar support handle to the shaft.