Rear Blower Motor

Rear Blower Motor

Removing






- Remove the rear HVAC housing and place it on a workbench. Refer to => [ Rear HVAC Housing ] Rear HVAC Housing.

- Disconnect the rear HVAC wire harness connector (4) from the rear blower motor (2).

- Remove the three screws (3) that secure the rear blower motor to the rear HVAC housing and remove the blower motor.

Installing






- Position the rear blower motor (2) into the rear HVAC housing (1).

- Install the three screws (3) that secure the rear blower motor to the rear HVAC housing. Tighten the screws to 2 Nm (17 in lbs).

- Connect the rear HVAC wire harness connector (4) to the rear blower motor.

- Install the rear HVAC housing. Refer to => [ Rear HVAC Housing ] Rear HVAC Housing.