Footwell Courtesy Lamp

Footwell Courtesy Lamp

Special tools, testers and auxiliary items required

• Trim Removal Wedge (RMCP101)

Removing






- Disconnect the negative battery cable. Refer to => [ Headlamp ] Headlamp.

- Insert trim removal wedge (RMCP101) or equivalent at point (1) and gently pry down to remove the panel from the overhead console.






- disconnect electrical connector (1) from the light emitting diode lamp (2).






- Remove the LED courtesy lamp (1) from the panel by pushing in on the tab (2) on the passenger side of the LED lamp and pivoting the lamp up out of the mounting tab.

Installing






- Install a new LED lamp (2) into the trim panel.

- Connect the electrical connector (1).

- Install trim panel to overhead console.

- Connect the negative battery cable. Refer to => [ Headlamp ] Headlamp.