EVAP Canister Filter

EVAP Canister Filter

Removing

• The filter location is on the top of the fuel tank at the left frame rail.

- Disconnect the negative battery cable.

- Remove the left rear wheelhouse liner..

- Disconnect the vent tube hose (1).






- Lower the fuel tank enough to gain access to the evaporative emission canister filter. Refer to => [ Fuel Tank ] Fuel Tank.

- Remove the EVAP canister filter hose (3) from EVAP canister.






- Remove the EVAP canister filter (2) from the frame rail (1).

Installing






- Install the EVAP canister filter (2) to the frame rail (1).

- Install the EVAP canister filter hose (3) to the EVAP canister.

- Raise the fuel tank into vehicle position. Refer to => [ Fuel Tank ] Fuel Tank.

- Connect the vent tube hose (1).






- Install the left rear wheelhouse liner..

- Connect the negative battery cable.