Grille: Service and Repair

Radiator Grille

Removing






Remove radiator grille:

- Remove screws - 2 and 3 -.

- Pull the radiator grille - 1 - out of the lock carrier - 5 -.

- Insert a screwdriver through the lower slats and release the catches - 4 -. There are 2 each on the left and right sides, next to the emblem - 7 -.

- Push the catches to the side in - direction of arrow b - and slightly pull the radiator grille - 1 - up.

- Remove the radiator grille - 1 - in - direction of arrow a - from the bumper cover - 6 -.

Remove the brand emblem:

- Release the catches on the back of the emblem - 7 - and remove it in - direction of arrow a -.

Installation






Install the radiator grille:

- Insert the radiator grille - 1 - into the bumper cover - 4 -.

- Tighten the bolt - 3 -. Tightening specification: 2 Nm.

- Tighten the bolts - 2 -. Tightening specification: 6 Nm.

Install the emblem:

- Insert the emblem - 5 - into the radiator grille in - direction of arrow a -.

- Turn the emblem - 5 - in - direction of arrow b - until it locks into place.