Access/Start Authorization Antenna 1 in Vehicle Interior (R138)
Access/Start Authorization Antenna 1 in Vehicle Interior (R138)
The access/start authorization antenna 1 in vehicle interior is installed under the front center console, in front of the selector lever.
• No coding, basic setting or adaptation is necessary if I Access/start authorization antenna 1 in vehicle interior is replaced. Erase the entry in the DTC memory via "guided fault finding" with the Vehicle Diagnostic Tester.
Removing
- Turn off the ignition and all electrical consumers.
- Remove the center console cover.
- Remove the access/start authorization antenna 1 in vehicle interior - 1 - vertically. Pay attention to the wires still connected.
- Disconnect the connector - arrow - and remove the access/start authorization antenna 1 in vehicle interior - 1 -.
Installing
Install in reverse order of removal.