Motor Support

Motor Support

Removing






- Remove the assembly frame from the vehicle. Refer to => [ Assembly Frame ] Assembly Frame.

- Remove sunroof motor. Refer to => [ Sun Shade Motor ] Sun Shade Motor.

- Remove the bolts - arrows - (2 Nm).

- Remove the cable covers - 1 and 2 - from the rear part - 4 -.






- Remove the cable ends - 1 - from the motor support - 2 -.

- Pry the motor support - 1 - out using a suitable screwdriver - 4 - from the front part - 2 -.

Installation

To install, perform the steps used for removal in reverse order.

• Do not lubricate the sun shade slide cables and motor support.

- Install the sunroof motor. Refer to => [ Sunroof Motor ] Sunroof Motor.

- Install the assembly frame.

- After completing all the work, perform a sun shade motor adaptation. Refer to => [ Adaptation Panorama Sunroof ] Adaptation Panorama Sunroof.