Tunnel Side Trim

Tunnel Side Trim

• The following describes removing and installing on the left side of the vehicle. Removing and installing on the right side is identical.

Removing

• Removing and installing the trim is identical for seats equipped with a pass-through.

- Remove front seat. Refer to => [ Front Seat ] Front Seat

- Remove the front seat belt latch. Refer to => [ Front Seat Belt Latches ] Front Seat Belt Latches

- Press the clamping pin - 1 - inward and remove it from the expanding clip - 2 -.

- Remove the spreader clip.

- Remove the trim - 3 - from the mountings in the seat frame.






Installation

- Install in reverse order of removal.