Diagram 103/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Radio/navigation display unit control module, Multimedia system control module, Radio, USB connection baseplate, External audio source connection, Fuse 8 (on fuse panel B)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J503 - Radio/navigation display unit control module Control Modules in Pass Compartment Radio Systems Overview

J533 - Data bus on board diagnostic interface Control Modules in Pass Compartment

J650 - Multimedia system control module Control Modules in Pass Compartment

R - Radio Control Modules in Pass Compartment

R193 - USB connection baseplate

R199 - External audio source connection Radio Systems Overview

SB7 - Fuse 7 (on fuse panel B) Overview Of Fuses

SB8 - Fuse 8 (on fuse panel B) Overview Of Fuses

SC18 - Fuse 18 (on fuse panel C) Overview Of Fuses

T4aq - 4-pin connector

T4ax - 4-pin connector

T4us - 4-pin connector

T12 - 12-pin connector

T12m - 12-pin connector

T20 - 20-pin connector

T30 - 30-pin connector

(370) - Ground connection 5 (in main wiring harness)

(371) - Ground connection 6 (in main wiring harness)

(687) - Ground connection 1 on center tunnel

(A178) - Infotainment CAN bus high connection (in instrument panel wiring harness)

(A179) - Infotainment CAN bus low connection (in instrument panel wiring harness)

(B224) - Radio connection 1 (in interior wiring harness)

(B318) - Positive connection 4 (30a) (in main wiring harness)

* - Only for vehicles without Start/Stop system

*2 - Only for vehicles with Start/Stop system

*3 - Through May 2011

*4 - Adapter cable

*5 - From May 2011