Diagram 3/7 (Tracks 71-84)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Driver's Entry Lamp and Turn Signal (in outside mirror), Driver's Mirror Adjustment/Fold-in Motor, Heated Outside Mirror Relay, Driver's Door Control Module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J99 - Heated Outside Mirror Relay Relay Carrier Overview

J386 - Driver's Door Control Module Control Modules in Pass Compartment

J519 - Vehicle Electrical System Control Module Control Modules in Pass Compartment

L131 - Driver's Exterior Mirror Turn Signal Lamp

T2ab - Double Connector, white

T3g - 3-Pin Connector

T3sa - 3-Pin Connector, black

T16a - 16-Pin Connector, black

T20a - 20-Pin Connector, black

T28 - 28-Pin Connector, behind left lower A-pillar trim Component Locations

V17 - Driver's Mirror Adjustment Motor

V121 - Driver's Mirror Fold-in Motor

V149 - Driver's Mirror Adjustment Motor

W52 - Driver's Entry Lamp (in outside mirror)

Z4 - Driver's Heated Outside Mirror

(205) - Ground Connection (in Driver's door wiring harness)

Previous Diagram 3/6 (Tracks 57-70)

Next Diagram 3/8 (Tracks 85-98)