Operation CHARM: Car repair manuals for everyone.

Diagram 108/2 (Tracks 1-14)






IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Compass magnetic field sensor, Multifunction indicator, Instrument cluster control module, Vehicle electrical system control module, Data bus on board diagnostic interface, Vehicle location recognition control module, Instrument cluster, Radio





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G197 - Compass magnetic field sensor Control Modules in Luggage Comp.

J119 - Multifunction indicator

J285 - Instrument cluster control module Control Modules in Pass Compartment

J503 - Radio/navigation display unit control module Control Modules in Pass Compartment Radio Systems Overview

J519 - Vehicle electrical system control module Control Modules in Pass Compartment

J533 - Data bus on board diagnostic interface Control Modules in Pass Compartment

J603 - Vehicle location recognition control module Control Modules in Luggage Comp.

K - Instrument cluster

R - Radio Control Modules in Pass Compartment

SC18 - Fuse 18 (on fuse panel C) Overview Of Fuses

SC23 - Fuse 23 (on fuse panel C) Overview Of Fuses

T8hm - 8-pin connector

T16b - 16-pin connector

T20 - 20-pin connector

T32 - 32-pin connector

T52c - 52-pin connector

(61) - Ground connection on left C-pillar Overview Of Ground Connections in Luggage Comp.

(369) - Ground connection 4 (in main wiring harness)

(A167) - Positive connection 3 (30a) (in instrument panel wiring harness)

(A178) - Infotainment CAN bus high connection (in instrument panel wiring harness)

(A179) - Infotainment CAN bus low connection (in instrument panel wiring harness)

(B318) - Positive connection 4 (30a) (in main wiring harness)

(B397) - Comfort system CAN bus high connection 1 (in main wiring harness)

(B406) - Comfort system CAN bus low connection 1 (in main wiring harness)

* - Only for vehicles without Start/Stop system

*2 - Depending on equipment

*3 - Only for vehicles with Start/Stop system

*4 - Through May 2011

*5 - From May 2011