Diagram 76/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Start system button, Access/start authorization control module, Vehicle electrical system control module, Electronic steering column lock control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E378 - Start system button Access/Start Authorization System Overview [1][2]Diagrams

F189 - tiptronic switch Transmission Overviews [1][2]Diagrams

J518 - Access/start authorization control module Access/Start Authorization System Overview Access/start Authorization Control Module -J518-

J519 - Vehicle electrical system control module Control Modules in Pass Compartment

J623 - Engine control module Control Modules in Engine Compartment

J682 - Terminal 50 power supply relay Relay Carrier Overview

J764 - Electronic steering column lock control module Electronic Steering Column Lock Control Module -J764-

L190 - Ignition start button illumination bulb

N360 - Steering column lock actuator

SC38 - Fuse 38 (on fuse panel C) Overview Of Fuses

T4bg - 4-pin connector

T7e - 7-pin connector

T10s - 10-pin connector

T16m - 16-pin connector

T32c - 32-pin connector

T52c - 52-pin connector

(367) - Ground connection 2 (in main wiring harness)

(B397) - Comfort system CAN bus high connection 1 (in main wiring harness)

(B406) - Comfort system CAN bus low connection 1 (in main wiring harness)

(B660) - Diagnostic terminal 50 connection (in main wiring harness)

* - Only for vehicles with Start/Stop system

*2 - Refer to applicable engine wiring diagram

*3 - Only for vehicles with automatic transmission

*4 - Through November 2010

*5 - Only for vehicles without Start/Stop system

*6 - Through May 2011

*7 - From November 2010

*8 - From May 2011

Next Diagram 76/3 (Tracks 15-28)