Diagram 90/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


ABS control module, Electromechanical parking brake control module, Left parking brake motor, Right parking brake motor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G200 - Transverse acceleration sensor Antilock Brake System w/ Anti Slip Regulation

G202 - Rotation rate sensor Antilock Brake System w/ Anti Slip Regulation

G251 - Longitudinal acceleration sensor Antilock Brake System w/ Anti Slip Regulation

J104 - ABS control module Control Modules in Engine Compartment [1][2]Diagrams

J540 - Electromechanical parking brake control module Control Modules in Pass Compartment [1][2]Diagrams

SC15 - Fuse 15 (on fuse panel C) Overview Of Fuses

SC44 - Fuse 44 (on fuse panel C) Overview Of Fuses

SC50 - Fuse 50 (on fuse panel C) Overview Of Fuses

T2an - Double connector

T2ao - Double connector

T30p - 30-pin connector

T38a - 38-pin connector

V282 - Left parking brake motor Locations [1][2]Diagrams

V283 - Right parking brake motor Locations [1][2]Diagrams

(43) - Ground connection on A-pillar, lower right Overview Of Ground Connections in Rear Seats

(288) - Headlamp range control ground connection (in instrument panel wiring harness)

(388) - Ground connection 23 (in main wiring harness)

(688) - Ground connection 2 on center tunnel Overview Of Ground Connections in Rear Seats

(A192) - Positive connection 3 (15a) (in instrument panel wiring harness)

* - Through May 2011

*2 - Through November 2010

*3 - From May 2011

Next Diagram 90/3 (Tracks 15-28)