Diagram 90/4 (Tracks 29-42)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Instrument cluster control module, Data bus on board diagnostic interface, Instrument cluster, Brake system indicator lamp, Electric parking/hand brake malfunction indicator lamp





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G476 - Clutch position sensor Locations [1][2]Clutch Pedal Position Sensor / Switch

J285 - Instrument cluster control module Control Modules in Pass Compartment

J519 - Vehicle electrical system control module Control Modules in Pass Compartment

J533 - Data bus on board diagnostic interface Control Modules in Pass Compartment

K - Instrument cluster

K118 - Brake system indicator lamp Locations

K214 - Electric parking/hand brake malfunction indicator lamp Locations

T5m - 5-pin connector

T20 - 20-pin connector

T32 - 32-pin connector

T52b - 52-pin connector

T52c - 52-pin connector

(367) - Ground connection 2 (in main wiring harness)

(376) - Ground connection 11 (in main wiring harness)

(381) - Ground connection 16 (in main wiring harness)

(605) - Ground connection on upper steering column Overview Of Ground Connections in Rear Seats

(640) - Ground connection 2 in engine compartment, left Overview Of Ground Connections in Engine Compartment

(684) - Ground connection on left front side member Overview Of Ground Connections in Rear Seats

(B340) - Connection 1 (58d) (in main wiring harness)

(B383) - Powertrain CAN bus high connection 1 (in main wiring harness)

(B390) - Powertrain CAN bus low connection 1 (in main wiring harness)

* - Depending on equipment

Previous Diagram 90/3 (Tracks 15-28)