Diagram 86/3 (Tracks 15-28)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


A/C control module, Vehicle electrical system control module, Data bus on board diagnostic interface, Front seat heating control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E94 - Heated driver seat adjuster

E95 - Heated front passenger seat adjuster

J301 - A/C control module Control Modules in Pass Compartment A/C Control Module -J301-

J519 - Vehicle electrical system control module Control Modules in Pass Compartment

J533 - Data bus on board diagnostic interface Control Modules in Pass Compartment

J774 - Front seat heating control module Control Modules in Pass Compartment

K114 - Fresh air and recirculation mode indicator lamp

SC20 - Fuse 20 (on fuse panel C) Overview Of Fuses

T10a - 10-pin connector Component Locations

T20 - 20-pin connector

T20c - 20-pin connector

T52c - 52-pin connector

(43) - Ground connection on A-pillar, lower right Overview Of Ground Connections in Rear Seats

(288) - Headlamp range control ground connection (in instrument panel wiring harness)

(388) - Ground connection 23 (in main wiring harness)

(B315) - Positive connection 1 (30a) (in main wiring harness)

(B397) - Comfort system CAN bus high connection 1 (in main wiring harness)

(B406) - Comfort system CAN bus low connection 1 (in main wiring harness)

(M45) - Connection 5 (in driver seat wiring harness)

(O15) - Connection 4 (in heated seats wiring harness)

* - Depending on equipment

Previous Diagram 86/2 (Tracks 1-14)

Next Diagram 86/4 (Tracks 29-42)