Right Temperature Door Motor (V159)

Right Temperature Door Motor (V159)

Special tools, testers and auxiliary items required

• Vehicle Diagnostic Tester

Removing

- Turn off all electric consumers.

- Switch off the ignition.

- Remove the key.

- Remove the glove compartment. Refer to Storage Compartments, Covers and Trim.

- Remove the right footwell vent. Refer to => [ Right Footwell Vent ] Right Footwell Vent.






- Disconnect the connector from the right temperature door motor.

- Remove the securing bolts - 1 - (1.4 Nm) and remove the right temperature door motor.

- Unhook brace - 2 - from right temperature door motor.

Installing

Install in reverse order of removal.

• After installing, function of right temperature door must be checked.

• Initiate "Basic Setting" function with Vehicle Diagnostic Tester. Refer to => [ Climatronic A/C System with Automatic Controls, Checking and Adjusting Components ] Climatronic A/C System with Automatic Controls, Checking and Adjusting Components.