Passenger and Driver Illuminated Vanity Mirror Lamps

Passenger and Driver Illuminated Vanity Mirror Lamps

Special tools, testers and auxiliary items required

• Trim Removal Wedge (VAS 3409)

• When removing and installing components in a visible area (switches, covers, trim, etc.), mask off the areas at which a prying tool ( (VAS 3409) , screwdriver) will be positioned, using commercially available adhesive tape.

• Removal and installation for both lights is performed in the same way and is only described for one light.

Removing

- Turn off the ignition and all electrical consumers.

- Carefully pry the light out of roof trim using (VAS 3409) or a screwdriver.






- Disengage and disconnect harness connector - arrow -.






Installing

Install in reverse order of removal.