Diagram 131/6 (Tracks 57-70)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Cornering lamp and headlamp range control module, Diagnostic connection





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G76 - Left rear level control system sensor Electronic Damping Overview [1][2]Diagrams

J745 - Cornering lamp and headlamp range control module Control Modules in Pass Compartment

SC15 - Fuse 15 (on fuse panel C) Overview Of Fuses

T4ar - 4-pin connector

T16 - 16-pin connector

T26b - 26-pin connector

U31 - Diagnostic connection

(43) - Ground connection on A-pillar, lower right Overview Of Ground Connections in Rear Seats

(288) - Headlamp range control ground connection (in instrument panel wiring harness)

(A192) - Positive connection 3 (15a) (in instrument panel wiring harness)

(B108) - CAN bus extended high connection 1 (in main wiring harness)

(B109) - CAN bus extended low connection 1 (in main wiring harness)

(B383) - Powertrain CAN bus high connection 1 (in main wiring harness)

(B390) - Powertrain CAN bus low connection 1 (in main wiring harness)

(N5) - Connection 4 (in headlamp range control wiring harness)

(N6) - Connection 5 (in headlamp range control wiring harness)

(N7) - Connection 6 (in headlamp range control wiring harness)

* - Through May 2011

*2 - Depending on equipment

*3 - From May 2011

Previous Diagram 131/5 (Tracks 43-56)