Turn Signal Lamp: Service and Repair

Front Turn Signal Bulb

• The illustrations show the procedure for removing and installing the front turn signal bulb in the right headlamp. The procedure for replacing the left front turn signal light is identical.

Removing

- Turn off the ignition and all electric consumers and remove the key.

- Rotate the lamp socket with the grip piece - 1 - in - direction of arrow - and remove it together with the front turn signal lamp from the headlamp.






- Turn the front turn signal lamp - 2 - in - direction of arrow - and pull it out of the socket.






Front turn signal lamp: 12V, 21 W

Installing


When installing the cover cap, make sure the cap is properly seated. It is destroyed by entry of water into headlamp.

• Do not touch the glass of the light bulb, when installing. Your fingers will leave traces of grease on the glass which, when the light is switched on, will evaporate and cloud the glass.

Install in reverse order of removal. Note the following:

- Check headlamp for function.