Multifunction Steering Wheel Control Module (J453), Through 05.10

Multifunction Steering Wheel Control Module (J453), Through 05.10

Removal

- Remove steering wheel airbag.

- Remove the driver side air bag unit.

- Disconnect both harness connectors at control module.

- Using a suitable screwdriver, carefully pry out control module - arrow -.






Installation

Install in reverse order of removal.

- Code control module for steering column electronics, refer to => [ Multifunction Steering Wheel, Adapting Components, Through 05.10 ] Multifunction Steering Wheel, Adapting Components, Through 05.10