Haldex Clutch

Haldex Clutch

The Haldex clutch has been redesigned. Beginning with the 2009 Tiguan, the new Haldex clutch (Generation IV) is being installed. It is also installed in the CC.






1 Seal

• Lubricate with high performance gear oil for Haldex clutch (052 175 A1) and install.

• Always replace.

2 Haldex Clutch Housing

• Haldex clutch removing and installing. Refer to => [ Haldex Clutch ] Haldex Clutch.

3 All Wheel Drive Control Module (J492)

• With the Haldex clutch control valve (N373).

• Removing and installing, refer to => [ All Wheel Drive Control Module (J492) ] All Wheel Drive Control Module (J492).

4 Bolts

• 6 Nm

5 Input Flange Seal

Removing and installing, refer to => [ Input Flange Seal, Rear Final Drive Installed ] Input Flange Seal, Rear Final Drive Installed.

6 Input Flange

• Removing and installing, refer to => [ Input Flange Seal, Rear Final Drive Installed ] Input Flange Seal, Rear Final Drive Installed.

7 Nut

• 210 Nm

• Secure with liquid locking fluid (D 000 600 A2).

8 Bolts

• 50 Nm

• Quantity: 4

9 Cover

• For the oil filter housing.

• A filter change is not required.

10 Cover

• For the pressure reservoir.


Never open the cover, danger of injury!

11 Seal

• Quantity: 2

• Diameter: 34 mm

• For the Haldex clutch pump.

• Lubricate with high performance gear oil for Haldex clutch (052 175 A1) and install.

• Always replace.

12 Haldex Clutch Pump (V181)

• Removing and installing, refer to => [ Haldex Clutch Pump (V181) ] Haldex Clutch Pump (V181).

13 Bolts

• 6 Nm