Diagram 92/3 (Tracks 15-28)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Windshield washer fluid level sensor, Data bus on board diagnostic interface





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G33 - Windshield washer fluid level sensor

J285 - Instrument cluster control module Control Modules in Pass Compartment

J533 - Data bus on board diagnostic interface Control Modules in Pass Compartment

K37 - Windshield washer fluid level indicator lamp

T2gb - Double connector

T20 - 20-pin connector

T32 - 32-pin connector

(410) - Sensor ground connection 1 (in main wiring harness)

(B383) - Powertrain CAN bus high connection 1 (in main wiring harness)

(B390) - Powertrain CAN bus low connection 1 (in main wiring harness)

(B397) - Comfort system CAN bus high connection 1 (in main wiring harness)

(B406) - Comfort system CAN bus low connection 1 (in main wiring harness)

Previous Diagram 92/2 (Tracks 1-14)