Diagram 50/9 (Tracks 99-112)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Access/Start Control Module, Instrument Cluster Control Module, Data Bus On Board Diagnostic Interface





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J285 - Instrument Cluster Control Module Control Modules in Rear Seats

J518 - Access/Start Control Module Control Modules in Rear Seats

J533 - Data Bus On Board Diagnostic Interface Control Modules in Rear Seats

K - Instrument Cluster

T32a - 32-Pin Connector, blue

T32b - 32-Pin Connector, green

T81 - 81-Pin Connector

(B385) - Powertrain CAN-Bus High Connection 3 (in main wiring harness)

(B387) - Powertrain CAN-Bus High Connection 5 (in main wiring harness)

(B388) - Powertrain CAN-Bus High Connection 6 (in main wiring harness)

(B392) - Powertrain CAN-Bus Low Connection 3 (in main wiring harness)

(B394) - Powertrain CAN-Bus Low Connection 5 (in main wiring harness)

(B395) - Powertrain CAN-Bus Low Connection 6 (in main wiring harness)

(B397) - Comfort System CAN-Bus High Connection 1 (in main wiring harness)

(B405) - Comfort System CAN-Bus High Connection 9 (in main wiring harness)

(B406) - Comfort System CAN-Bus Low Connection 1 (in main wiring harness)

(B414) - Comfort System CAN-Bus Low Connection 9 (in main wiring harness)

Previous Diagram 50/8 (Tracks 85-98)