Engine Control Module, Replacing

Engine Control Module, Replacing

Special tools, testers and auxiliary items required

• Vehicle Diagnosis, Testing and Information System (VAS 5051A)

• If more than one component of the immobilizer is replaced, during ordering, it must be indicated that the VIN must be stored in the components (entry/ instruction during ordering in SAP: Store VIN). If this is not done, adaptation is not possible.

Always adapt the engine control module to the immobilizer after installing a new or used module.

- Connect the (VAS 5051A).

- In (VAS 5051A) , select operating mode "Guided Fault Finding".

- Using the "Go To" button, select "Functions/Component selection" and the following menu options in sequence:

• Body

• Electrical Equipment

• 01 - On Board Diagnostic (OBD) capable systems

• Anti-Theft Immobilizer

• Anti-theft Immobilizer functions

• Removing and installing the engine control module