Rear Spoiler

Rear Spoiler

Removing





- Slide the trim removal wedge (3409) between the hinged window - 2 - and the cover - 1 -.

- Pull the trim removal wedge (3409) through the tape - 3 - in - direction of arrow a - and loosen the cover from the hinged window.

- Remove the cover - 1 - from the hinged window - 2 - - arrows b -.





- Remove the nuts - 3 -.

- Loosen the rear spoiler - 2 - from the clamps - 4 -.

- Disconnect the brake lamp connector and hose connection.

- Remove the rear spoiler - 1 - - arrow -.

Installation

- Check the clamps - 4 - and the grommets - 5 - for damage. Replace them if necessary.

- When installing rear spoiler, tighten the nuts - 3 - to 6 Nm.

To install, perform the steps used for removal in reverse order.