Subframe Rear Bonded Rubber Bushing

Subframe Rear Bonded Rubber Bushing

Special tools, testers and auxiliary items required

• Supporting ring (T10301/8)

• Press piece (T10301/5)

• Tube (T10301/3)

• Hydraulic Press (VAS 6178) with Pressure Head (T10205/13)

• Nut (T10301/2)

• Spindle (T10301/1)

Pressing Out

- Install tools as shown in the illustration.





1. (T10301/5)

2. (T10301/8)

3. (T10301/3)

4. (VAS 6178) with (T10205/13)

5. (T10301/2)

6. (T10301/1)

- Press out bonded rubber bushing.


Secure (VAS 6178) while pressing out.

Installation Position

One of the arrows - 1 - must point in direction of travel





Pressing In

- Install tools as shown in the illustration.





1. (T10301/7)

2. Bonded rubber bushing

3. (T10301/6)

4. (VAS 6178) with (T10205/13)

5. (T10301/2)

6. (T10301/1)

- Press in bonded rubber bushing until shoulder lies gap-free at subframe sleeve.

- Mount subframe to body. Refer to => [ Mount subframe on body and remove (second mechanic required). ] Overhaul.