Exhaust System Components

Exhaust System Components

Special tools, testers and auxiliary items required

• Ring Spanner 7-Piece Set (3337)

CAUTION!
When doing any repair work, especially in the engine compartment, pay attention to the following due to clearance issues:

• Route lines of all types (for example, fuel, hydraulic, Evaporative Emission (EVAP), coolant, refrigerant, brake fluid and vacuum) and electrical wiring so that the original path is followed.

• Ensure sufficient clearance to all moving or hot components.

• After working on the exhaust system ensure that the system is not under stress, and that it has sufficient clearance from the bodywork. If necessary, loosen the double clamps and clamp and align the exhaust pipe so there is enough clearance to the body and the weight is distributed evenly among the mounts.

• Replace the self locking nuts.