Halogen Headlamps Overview, From 12.06

Halogen Headlamps Overview, From 12.06

• Check for possible influences upon the headlamp adjustment, check the adjustment itself, and if needed, adjust the headlamps. Refer to Maintenance Procedures; Rep. Gr. 03.






1 - Cap

2 - Left Low Beam Headlamp (M29) and Right Low Beam Headlamp (M31)

• Bulb H7 12V, 55 W

• Removing and installing, refer to => [ Low Beam Bulb ] Low Beam Bulb.

• Checking, refer to => [ Vehicle Electrical System, Output Diagnostic Test Mode ] Scan Tool Testing and Procedures.

3 - Left Headlamp Beam Adjustment Motor (V48) and Right Headlamp Beam Adjustment Motor (V49)

• Removing and installing, refer to => [ Headlamp Range Control Positioning Motor ] Headlamp Range Control Positioning Motor.

• Checking, refer to => [ Halogen Headlamp Range Control Positioning Motor, Checking ] Halogen Headlamp Range Control Positioning Motor, Checking.

4 - Left High Beam Headlamp (M30) and Right High Beam Headlamp (M32)

• Lamp H9 12V, 65 W

• Removing and installing, refer to => [ High Beam Bulb ] High Beam Bulb.

• Checking, refer to => [ Vehicle Electrical System, Output Diagnostic Test Mode ] Scan Tool Testing and Procedures.

5 - Cap

6 - Headlamp

• Removing and installing, refer to=> [ Headlamps ] Headlamps

• Correcting installation position of headlamp, refer to => [ Headlamps, Correcting Installation Position ] Headlamps, Correcting Installation Position.

• Perform a basic setting on the headlamp. Refer to Maintenance Procedures; Rep. Gr. 03.

7 - Headlamp Mount

• Removing and installing, refer to => [ Headlamp Mount ] Headlamp Mount.

8 - Screws

• For mounting headlamp mount on body.

• 5 Nm

9 - Left Parking Lamp (M1) and Right Parking Lamp (M3)

• Bulb 12V, 5 W

• Removing and installing, refer to => [ Parking Lamp Bulb ] Parking Lamp Bulb.

• Checking, refer to => [ Vehicle Electrical System, Output Diagnostic Test Mode ] Scan Tool Testing and Procedures.

10 - Left Front Turn Signal Light (M5) and Right Front Turn Signal Light (M7)

• Bulb 12V, 21 W

• Removing and installing, refer to => [ Front Turn Signal Bulb ] Front Turn Signal Bulb.

• Checking, refer to => [ Vehicle Electrical System, Output Diagnostic Test Mode ] Scan Tool Testing and Procedures.

11 - Lamp Socket With Grip

• For Left front turn signal bulb (M5) and Right front turn signal bulb (M7).