Diagram 70/12 (Tracks 141-154)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Reducing Agent Reservoir Sensor, Reducing Agent Reservoir Processing Unit, Reducing Agent Pump, Reducing Agent Pump Heater





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G697 - Reducing Agent Reservoir Sensor

G698 - Reducing Agent Reservoir Processing Unit Locations

J623 - Engine Control Module (ECM) Control Modules In Engine Compartment

T3as - 3-Pin Connector

T4qe - 4-Pin Connector

T4qf - 4-Pin Connector

T5am - 5-Pin Connector

T8au - 8-Pin Connector, running gear, rear left

T10e - 10-Pin Connector, green, electronics box, engine compartment Overview Of Connector Stations And Connectors

T14k - 14-Pin Connector, running gear, rear left

T17a - 10-Pin Connector, brown, electronics box, engine compartment

T94aa - 94-Pin Connector

V437 - Reducing Agent Pump Locations

Z103 - Reducing Agent Pump Heater

(201) - Ground Connection 5 (in engine compartment wiring harness)

(336) - Ground Connection 1 (in floor wiring harness)

(W67) - Connection (87) (in floor wiring harness)

* - Special wiring in tank

Previous Diagram 70/11 (Tracks 127-140)

Next Diagram 70/13 (Tracks 155-168)