Side Turn Signal

Side Turn Signal

Removing

• LEDs with a long service life are installed in the side turn signals instead of standard bulbs.

• Because of that, it is not necessary to replace bulbs. If there is damage, the entire turn signal assembly must be replaced.





- Mirror Glass, Removing, refer to => [ Mirror Glass ] Mirror Glass

- Remove the mirror motor. Refer to => [ Mirror Motor ] Mirror Motor

- Remove mirror housing, refer to => [ Mirror Housing ] Mirror Housing

- Remove the 2 screws - 2 -.

- Carefully loosen the 3 hooks - 5 -.

- Remove the side turn signal - 1 - from the assembly piece - 4 - - arrow -.

- Disconnect the connector - 3 -.

Installing

To install, perform the steps used for removal in reverse order.