Metal Valve

Metal Valve

Removing

- Remove tire pressure sensor. Refer to => [ Tire Pressure Sensor ] Tire Pressure Sensor.

- Remove nut from metal valve.





- Counterhold metal valve using retainer (for example 2 mm spiral bore) while doing so.

Installing


• Only tighten the metal valve nut to the specified torque. Tightening more is not permitted because it damages the seal.

- Tighten nut for metal valve.





- Counterhold metal valve using retainer (for example 2 mm spiral bore) while doing so.

- Install tire pressure sensor. Refer to => [ Tire Pressure Sensor ] Tire Pressure Sensor.