4.2L (AXQ)

Generator Overview






1 - Angle Bracket

2 - Hex Socket Head Bolts

• 9 Nm

• M6 x 25 mm

3 - Coolant Pipe

4 - Clamp

5 - Coolant Hose

• Connection diagram for coolant hoses. Refer to => Engine Mechanical, Fuel Injection and Ignition 19 Description and Operation.

6 - O-ring

• Replace

7 - Generator

• B+ wire fastener to generator, 15 Nm, refer to => [ B+ Cable Mount on Generator ] Procedures.

• Neither the voltage regulator nor the carbon brushes can be replaced individually; if a repair is required, the entire generator must be replaced.

• Generator, removing and installing, refer to => [ Generator ] Generator.

• Generator ribbed belt pulley, removing and installing, refer to => [ Ribbed Belt Pulley on Generator ] Ribbed Belt Pulley on Generator.

8 - Ribbed Belt

• Ribbed belt, checking, refer to => [ Ribbed Belt, Checking ] Testing and Inspection.

• Ribbed belt routing, refer to => [ Ribbed Belt Routing ] Ribbed Belt Routing.

9 - Socket Head Bolt With Washer

• 22 Nm

• M8 x 90 mm