Generator, Air Cooled Overview

Generator, Air Cooled Overview






1 - Socket Head Bolt With Washer

• 20 Nm

• M8 x 30 mm

2 - Tension Roller

3 - Socket Head Bolt With Washer

• 20 Nm

• M8 x 40 mm

4 - Fitted Bolt With Washer

• 20 Nm

• M8 x 25 mm

5 - Socket head bolts with washer

• 20 Nm

• M8 x 40 mm

6 - Fitted bolt with washer

• 20 Nm

• M8 x 25 mm

7 - Bracket

8 - Idler Pulley

9 - Fitted Bolt With Hex Head

• Component of relay pulley item 8, cannot be replaced separately.

• 40 Nm

• M10 x 50 mm

10 - Cap

11 - Generator

• B+ wire fastener to generator, 15 Nm. Refer to => [ B+ Cable Mount on Generator ] Procedures.

• Replace the voltage regulator (only Valeo generator 021 903 016). Refer to => [ Voltage Regulator, Air Cooled Generator ] Service and Repair.

• Generator, removing and installing, refer to => [ Generator, Air Cooled ] Generator, Air Cooled.

• Generator ribbed belt pulley, removing and installing, refer to => [ Free-Wheel Belt Pulley ] Free-Wheel Belt Pulley.

12 - Ribbed Belt

• Ribbed belt, checking, refer to => [ Ribbed Belt, Checking ] Testing and Inspection.

• Ribbed belt routing, refer to => [ Ribbed Belt Routing, Generator, Air Cooled ] Ribbed Belt Routing, Generator, Air Cooled.

13 - Collar Bolts

• 20 Nm

• M8 x 90 mm