Front Suspension Overview

Front Suspension Overview

• If components with bonded rubber bushings were replaced or bolts/nuts on these components were loosened, corresponding wheel suspension must be lifted into curb weight position. Refer to => [ Wheel Bearing, Bringing to Curb Weight Position ] Procedures.

• Welding and straightening work on supporting or wheel carrying components of suspension is not permitted.

• Always replace self-locking nuts.

• Always replace corroded bolts/nuts.





I - Refer to => [ Subframe, Stabilizer Bar and Lower Control Arm Assembly Overview ] Subframe, Stabilizer Bar and Lower Control Arm Assembly Overview.

II - Refer to => [ Front Suspension Assembly Overview ] Front Suspension Assembly Overview.

III - Refer to => [ Wheel Bearing Assembly Overview ] Front Suspension.






IV - Refer to => [ Suspension Strut Assembly Overview ] Suspension Strut Assembly Overview.

V - Refer to => [ Front Air Spring Damper Assembly Overview ] Front Air Spring Damper Assembly Overview.